Upload Design (Standard Product Label / Decal)

Bleed requirement

• 2.5mm bleed is required all round
• The overall height and width of the submitted artwork (bleed size) therefore should be 5mm larger than the actual label / decal size (trim size)
• Safe margin for the design is 2.5mm from the edge of trim size

Cutting line requirement

• Artwork must be in pdf format (generated in Adobe Illustrator only)
• Cutting line must be in vector format, placed in a separate layer
• Additional amendment charges may incur if the artwork is not in the required format

Note:

• Artwork submitted must be in full bleed size
• Please make sure to keep all critical design element within the safe margin
• Minimum Resolution: 150ppi